• Screw the timber battens (size +/- 29 x 22mm) or the PVC-u battens (P9050, 30 x 20mm) horizontally to the wall. Ventilation of battens and the use of PVC-u battens is advisable in humid rooms.
• Nail or staple the start or corner trim onto the battens.
• Fit the first plank with the tongue into the trim and nail or staple through the grooveside flange onto the battens (nails: min. H16mm x 1,5mm, staples: min 14mm).
• The subsequent planks, tightly joining the tongue into the groove. fixing distance: max. 30cm.

• Screw the timber or PVC-u battens vertically to the wall and follow the above mentioned instructions.
• Start fitting at the top, with the tongue of the first plank facing upwards into the trim.

Starline panels make a perfect ceiling or wall covering. Installation can be by pinning, stapling or bonding direct to a wall or ceiling where the surface is good. If the surface is uneven or damaged, battens are recommended.

Figure 1-4: Screw either timber (38 x 25mm) or PVC battens (P9050) horizontally to wall or ceiling Ventilation is recommended in humid rooms.

• Nail or staple the start or corner trim onto the battens.
• Fit the first panel with the tongue into the trim and nail or staple through the grooveside flange onto the battens.
• Fix the subsequent panels, tightly joining the tongue into the groove.

Figure 5: Fitting light fittings can be achieved quite simply, however always consult a qualified electrician for the correct lighting specification.